Plastic Molding Manufacturer | China Custom Plastic Parts Services Contact@china-plasticparts.com
Author: MULAN -Plastic Molding Manufacturer
The application range of the cnc machining center is very wide, and it is also a kind of equipment that is often used in the field of precision machining. When using the machining center, no matter whether it is before use, during the process or after use, the corresponding maintenance items cannot be ignored. , Mulan Machinery has been engaged in cnc external processing for 17 years. Today, I will share with you the maintenance knowledge about cnc machining centers. 1. Before the operation of the machining center, wear all labor protection articles, carry out lubrication and maintenance as required, and check the oil level of each lubricating oil. 2. When clamping the workpiece, it should be handled with care to prevent collision and damage to the work table; when the workpiece of the machining center is heavy, the bearing capacity of the machine tool workbench should also be verified, and the machining center is not allowed to run overloaded.
3. The machining program should be checked first before running. When using the high-speed function of the machining center, it is necessary to confirm the matching of the tool. 4. After the machine tool of the machining center is started, check whether the movement of the main shaft and the worktable in all directions is normal, and whether there are abnormal noises, etc. 5. During the processing, always pay attention to whether the movement and processing state of the machine tool are normal, and if any abnormal phenomenon is encountered.
In case of noise and alarm, stop the machine immediately for inspection and treatment, and the machining center can continue processing after troubleshooting. Good maintenance habits and periodic inspections can not only increase the service life of the machine tool, but also maintain good machining accuracy. Therefore, we will maintain and maintain the machine tool on a periodic basis. When processing high-precision parts Only then will you be calm.