How to choose the cutting amount for CNC vertical lathe processing

Author: MULAN -Plastic Molding Manufacturer

Let's take a look at the impact of cutting speed on CNC vertical lathe processing. If the cutting speed is increased, the temperature of the tool tip will also rise a lot, which will cause some mechanical, thermal or chemical wear. , Conversely, if the cutting speed is too slow, then the temperature of the tool tip will drop, so naturally there is no way to guarantee the amount of cutting, because in this way, choosing the appropriate amount of cutting becomes very important. So, how should we choose the appropriate amount of cutting? If you want to choose the appropriate cutting amount, then you must consider whether the cutting speed is appropriate in combination with the material hardness, cutting state, feed rate, and depth of cut. When turning, the cutting amount must be judged according to the specific situation, otherwise, the service life of the tool and the cutting amount may be affected due to the failure to master the appropriate cutting amount. The above is related to the selection of cutting amount for CNC vertical lathe processing. From the above content, it can be seen that the selected cutting amount will directly affect the overall processing speed and the service life of the equipment. If the operator does not know when processing the workpiece What kind of cutting amount should be selected, then, it is recommended not to choose the cutting amount blindly.