Plastic Molding Manufacturer | China Custom Plastic Parts Services Contact@china-plasticparts.com
Author: MULAN -Plastic Molding Manufacturer
Lathes are the most commonly used machine tool equipment among various machine tools. Before operating the machine tool, it is necessary to fully master the general knowledge of safe operation procedures and machine tool maintenance and lubrication, and be able to independently operate and safely maintain the machine tool. It is necessary to develop the habit of safe and civilized production, good professional ethics and strict labor discipline.
The power supply of the machine tool of the cnc processing manufacturer is 380V. When the machine tool is turning the workpiece, the chuck and the workpiece rotate at high speed. Iron filings are produced when the lathe comes into contact with the workpiece. At this time, you must pay attention to safety. If you are negligent, personal accidents will occur.
Therefore, the safe operation of machine tools is particularly important. Before starting the machine tool, check whether all parts of the machine tool mechanism are in good condition, and whether the positions of the transmission handles and shift handles are correct, so as to prevent the machine tool from being damaged due to sudden impact when it is started. After the machine tool is started, the spindle must be idling at low speed for 1-2 minutes, so that the lubricating oil can be distributed to the places that need to be lubricated, and the machine tool can only work after it works normally.
During lathe processing, if the spindle needs to change speed, it must stop before changing speed. In addition, when cutting workpieces at high speed, you must wear work clothes, protective glasses, and a work cap. In the process of processing the workpiece with the lathe, the operator's head should not be too close to the workpiece, should not wear rings and other accessories, should not wear gloves, should not use the hand brake to rotate the chuck, and should not measure the workpiece while the lathe is rotating , Do not touch the surface of the workpiece with your hands, and turn off the main power of the machine tool. After the machining work is completed, use a special hook to remove the iron filings remaining on the lathe parts on the workpiece during the cutting process.