How to prevent leakage in CNC vertical lathe processing?

Author: MULAN -Plastic Molding Manufacturer

First of all, it is necessary to ensure that the transmission box of the CNC vertical lathe is connected to the sealing position of the valve shaft in place, that is to say, it must form a whole that will not leak. If there is no way to do this, then it is necessary to do a good job of preventing Leakage measures, the specific leak prevention measures need to be determined in combination with the type of product being processed and other factors. Then, in the process of using CNC vertical lathe, it is necessary to ensure that there are no other sundries in the equipment, and it is necessary to ensure that there is sufficient lubrication protection for the relevant gears. If the lubrication work is not done well enough, then, also It will cause some problems to a large extent. Finally, pay attention to the direction when closing or opening the valve. If the direction of closing or opening is wrong, for example, if it is closed or opened in the opposite direction, then it may cause abnormal materials, resulting in leakage problems, and The correct opening and closing method is to open and close clockwise, and the operator should pay special attention to this.

The above is the relevant content of the leak-proof method of CNC vertical lathe processing. As an operator, you must strictly follow the requirements when operating the equipment. When you find a leak during use, you must find out the cause of the leak, and then combine it with the reason. Find a way to solve the leakage problem, so as to avoid material waste or environmental pollution.