Custom Injection Molding Company | Plastic Injection Moulding Services | Mulan Manufacturing Group Contact@china-plasticparts.com
Author: MULAN -Plastic Molding Manufacturer
The deburring process is part of a series of post-processing of hollow blow molding products. Not all products require the deburring step, which is determined by the equipment, process and structure of the product. The traditional way of trimming flash is to use different tools to trim manually. As the labor cost is getting higher and higher, some products no longer need manual trimming or reduce the labor part. Here is a small editor who is proficient in blow molding to share the rough edge process of blow molding products: 1. For some bottles and smaller hollow blow molding products, molds with flash removal devices have been widely used to automatically remove flash and burrs. This is to optimize the mold itself so that the product has no flash, thus completely eliminating the problem of manual trimming. Since most of the flash removal devices are pneumatic devices, it will bring vibration to the machine during the flash removal process, so long-term vibration will affect the normal use of the equipment. Large blow molding products are not suitable for this automatic flash removal device. With the continuous development of the robot market, there are devices for trimming hollow blow molding products by robots with a knife on the market, but there are not many manufacturers currently using them. The main reason is that the price of robot flash repair is still very high, and the blow molding product itself has a large shrinkage, which is not conducive to the smooth operation of the robot system. Proficient in blow molding 23 years experience in blow molding customization. The supporting equipment is complete, with many different types of blow molding machines, injection molding machines, mold opening equipment, printing equipment, etc., which can meet the customization of different complex and special-shaped blow molding parts.