What are the common injection mold processing techniques?

Author: MULAN -Plastic Molding Manufacturer

How to turn the mold steel into a mold is mainly through machine tool processing, engraving machine processing, electric pulse processing, professional mold master processing and processing, and finally the steps of mold testing. Next, the injection mold processing manufacturers will introduce to you! The so-called machine tool processing is to process the mold steel into a shape based on three-dimensional data. At this time, the mold processing is rough machining, and the appearance still looks bumpy, and the various sizes are not in place. And why is it rough machining? The main reason is to reduce the time spent on the engraving machine and improve the precision of the subsequent machining.

The subsequent engraving machine processing is mainly to reprocess the mold steel after rough processing. At this time, the processing is relatively fine and takes a long time. The specifics depend on the quality of the engraving machine and the programming ability of the workers. Good engraving machine quality and time are relatively short. What are the common injection mold processing techniques? Then there is electric pulse processing, the so-called electric pulse processing is to re-process the places where the engraving machine processing is not in place.

Secondary processing of corners and deeper areas. At this time, the processed templates are closer to the data. Finally, various manual tasks such as ejector pin, screw threading, and guide post are performed by professional mold masters to ensure the smoothness of mold injection molding.

Reduce the number of mold repairs in the future, and finally try the mold. The above are basically common processing techniques when making molds.